Ford Ranger
Ford Ranger questions and answers
Learn more about the Ford Ranger in the LemonFree.com Resources Section.
Q: ford ranger?
how come my 88 ford ranger with a 2.3L and a 5-speed manual gets the same MPG as a new 08 ranger with the same thing.
A: Don't Know, because you don't have the same engine. Current 2.3 engine is a duratech. Same engine found in the Focus ST. completly differant engine
Q: What kind of transmission does an 85 ford ranger have?
I have a transmission from a 1990 mustang 2.3 that i believe is an A4LD. Is this the correct transmission for a 1985 ford ranger? Direct swap?
A: What kind of transmission does an 85 ford ranger have? It has an 85 ford ranger transmission.
Q: How much does a ford ranger weigh in tons?
I am trying to scrap a ford ranger xlt with a six banger engine and short cab. How much would the weightage be in tonage?
A: 2 to 3 tons
Q: I am buying a Ford Ranger to build as a offroad prerunner is California registration required?
It will be run strictly offroad but will still resemble a Ford Ranger, so do I have to register it/ transfer the ownership/ etc......?
also what type of registration if I do need to register
A: Greeting,
I am in Ohio and all cars on public properties like roads are require to register else you're in deep trouble.
I would advice you to check your local BMV else we yahoowers can you in trouble.
Best of luck.
Q: How do i make my ford ranger look good?
I just got a 2001 ford ranger xlt and even though its 2 wheel drive i wanted to give it a more offroad look. I just turned 16 so im new to this kind of stuff, so if someone could help me it would be much appreciated.
A: Lift kit, roll bars with lights, brush guard,step bars, bed rails
Q: What good exhaust company makes dual mufflers for a 2003 Ford Ranger?
I got a 2003 ford ranger and i wanna make it dual exhaust but most exhaust systems i find for my truck are only one exhaust. I looked and i only got one muffler. I want to know what company makes one for mine or how do i make it a dual?
A: The closest you'll get to dual exhaust is dual tips at the rear merging from where the main exhaust pipe runs under the truck on the passenger side. You won't have a true dual due to the fuel tank being on the inside of the chassis rail. I also have a 2003 Ranger. It's a 3.0L RWD Edge model. I'd prefer not to make it true dual because these trucks are not fast to begin with (not even a 4.0L) and after a few hundred dollars worth of exhaust mods it still won't be worth it ( dollar to power gain ratio ). I worked on real dragstrip musclecars and I would only bother with the dual exhaust if the engine saw a significant gain with just dual exhaust alone. These trucks won't see that. Putting dual exhaust just for looks also screams "poser" (i.e. wanna be fast, but aren't) to the keen eye.
Q: How do I measure the size of my speakers in my ford ranger? And also how to know what wattage to buy?
I want to buy 4 new speakers for my '97 ford ranger to get better sound quality, but i don't know how to measure them to look for new ones. And my stereo system says 50x4 watts....what does this mean?
A: 50 x 4 is a max value for each speaker
the realistic amount of power going to those is more like 20 watts.
you would want to find some speakers with low RMS values(under 50 or so),
and there are many sites to find your speaker sizes.
from crutchfield:
1997 Ford Ranger Pickup
with AM/FM/Cassette deck; with AUTO SET button on factory radio
* Aftermarket Stereo Installed [change]
Factory replacement info:
In-dash stereo
7-1/2" depth; Size code E,S,U ; Non-standard dash opening (special integration package required)
Front speakers
Front Door: 6x8"
Far rear speakers
Behind Seat: 6x8"
So you need 6x8s or 5x7s
(normally the same thing, or very close to it)
Assuming I set up your truck right.
here's the link to the thing I used:
http://www.crutchfield.com/cgi-bin/autoinfo/autoinfo.asp?lp=%2fapp%2fCar%2fMyCar.aspx
Q: What is the length of a short bed and long bed ford ranger pickup?
I am looking for used truck topper canopies. What is the bed length of a Short bed ford ranger and long bed?
A: Short bed is 72.7" (nominal 6')
Long bed is 84.6" (nominal 7')
craigslist and ebay are your friends on this item.
Good luck!
Q: Where can i find a used automatic transmission for a 1998 ford ranger 4x4?
I am looking for a cheap transmission for my 1998 ford ranger 4wd automatic transmission. I need the truck for school and it starts soon! Thanks!!
It is also a 3.0 Liter.
A: car-part.com
Q: What is a better transmission to have in a Ford Ranger?
I have been looking for a Ford Ranger for a while and I was wondering if it would be better for me to have an automatic transmission or manual transmission?
I am planning on towing a small trailer and hauling some stuff so it would be like my work truck but also my daily driver
I know how to drive a manual transmission and would like one but I don't know which transmission would be better for what i want to do
and the Ranger will be a 1999-2003
thx in advance
A: well im a fan of the manual, but either would work just fine for you just dont tow in overdrive
Q: I have a 2000 ford ranger pick up. How hard is it to put that engine in a 2001 Pontiac sunfire?
The ford ranger is a 5 speed and was totaled in a wreck. The pontiac is automatic. I want to use the transmission and motor from the truck and put it in the sunfire.
A: Don't listen to those people, they're clueless. It'll take a weekend but you can do it. You can use high strength epoxy (JB weld works best), to essentially glue the new motor in (it's good stuff, no need for bolts here!).
Then you'll need a drill and some zip ties to hold the rear end in place. I recommend using the drive shaft out of the ranger but you can use a length of PVC pipe too. Good luck!
Q: How much would I cost to get my Ford Ranger painted orange or red?
I have 1999 ford ranger super cab, I want to get the whole truck painted. About how much would it cost?
A: How good a paint job do you want? Minimum, six cans of Krylon spray paint, about $30. Maaco $250-$500. Factory quality $2500. Show quality $10,000+.
Q: What would cause a 88 ford ranger to stall?
So what could be the causes of a 88' ford ranger to stall? Its got new fuel pump, oil pump, distributor module. 20 minutes later it's back in action though. Do you think it could be a heating core or radiator problem?
A: not sure what climate you are in but it could the cold start valve or a vaccum leak. Did you replace the fuel filter when you did the pump?
Q: How to you fix a Ford Ranger bumper that has fallen off by yourself? WIthout taking it to a auto shop?
Its a year '98 ford ranger and the bumper fell off..I don't have money to spend on a repair. I just have to do it by myself...How do you fix it?
A: You should beg, borrow or steal a socket wrench! The large bolts are difficult to get to access with a cresent wrench. U need a good hammer With a little UMPH! to bend back the dog ears (Sliding Parts) and then a block of wood to beat the thing back into place. A little penetrating oil will help everywhere! Get rags to clean every oily thing up. lot of oil with steel work is usually a good thing.. I believe starting in 97 everything has an air bag. I'm not sure where the sensors that detect shock (Impacts) I was told at school these are located right on the bumper (behind it) so look for loose wire!!! When you find them make sure to talk to a pro about putting them back together. Good Luck Ill pray for you
Q: How do I take off the center console/armrest on my 1999 Ford Ranger regular cab?
How do I take off the center console/armrest on my 1999 Ford Ranger regular cab?
So I need to take out my front seat to get to the bolt for the center console?
A: It is part of the driver's seat assembly. If you remove it you will have the hole on the right side of the seat. There's no cover made for it.
EDIT: Don't know who gave me the thumbs down, but I know what I'm talking about. I've had my seat out of my Ranger. Remove the armrest and you'll find a hard plastic insert with sharp edges that can cut your arm if not careful.